Back-Shu Points: Anatomical Landmarks and Spinal Levels

By Genie

Introduction

Locating Back-Shu points accurately is an important part of acupuncture training. These points are located on the back, alongside the spine, and are commonly identified by their relationship to specific vertebral levels.

One challenge for students is identifying the correct spinal level through palpation. The vertebrae are not always easy to distinguish, especially when the spinous processes are close together or difficult to feel.

Several anatomical landmarks can help establish a starting point, including C7, the scapular spine, the inferior angle of the scapula, the iliac crest, and the posterior sacral foramina. Learning how these structures relate to the spine makes it easier to organize and remember the locations of Back-Shu points.

1. What Are Back-Shu Points?

Back-Shu points (背俞穴, Bèishù Xué) are acupuncture points located on the back, along the Bladder Meridian of Foot-Taiyang (足太陽膀胱經, Zú Tàiyáng Pángguāng Jīng).

Many Back-Shu points are traditionally associated with particular Zang-Fu organs. In traditional Chinese medicine (TCM), these associations are used as part of pattern differentiation and treatment planning.

For anatomical study, the most important first step is to identify the correct spinal level and then locate the point at the appropriate distance from the posterior midline.

Most thoracic and lumbar Back-Shu points are located approximately 1.5 proportional cun lateral to the posterior midline at the level of the corresponding vertebra. The exact location should be confirmed using a reliable acupuncture point reference and the anatomical features of the individual.

A proportional cun is a traditional body-based measurement unit. It is not a fixed number of centimetres for every person.

2. C7: Vertebra Prominens

C7 is commonly called the vertebra prominens because its spinous process is often prominent and can be felt near the base of the neck.

How to locate C7

  1. Ask the person to sit or stand comfortably with the neck slightly flexed.

  2. Palpate the midline at the base of the neck.

  3. Identify the prominent spinous processes.

  4. Gently compare their positions and movement as the neck flexes and extends.

C7 is a useful starting landmark, but the most prominent spinous process is not always C7. In some individuals, the spinous process of T1 may be equally prominent or easier to feel.

Movement and shape can provide additional clues, but they do not reliably distinguish C7 from T1 in every person. When the level is uncertain, use other anatomical landmarks and an appropriate reference rather than relying on prominence alone.

Why C7 matters

Identifying C7 helps establish the transition between the cervical and thoracic regions. This is particularly useful when counting downward to locate thoracic vertebral levels.

3. Scapular Spine: A Landmark for T3

The scapular spine is the palpable horizontal ridge on the posterior surface of the scapula, or shoulder blade.

How to locate the scapular spine

  1. Ask the person to relax the shoulders.

  2. Palpate the back of the scapula.

  3. Follow the bony ridge from the lateral side toward its medial end, closer to the spine.

  4. Use the medial end as an approximate reference for the T3 spinous process.

The medial end of the scapular spine is commonly described as being near the level of T3. However, this is an approximate relationship rather than a fixed rule. Shoulder position, posture, body shape, and individual anatomical variation can affect the apparent level.

Related Back-Shu point

BL13(Feishu) is located at the T3 level, approximately 1.5 cun lateral to the posterior midline.

Using the scapular spine can help estimate the T3 level before confirming the spinal landmarks directly.

4. Inferior Angle of the Scapula: A Landmark for T7

The inferior angle of the scapula is the lowest point of the shoulder blade.

How to locate the inferior angle

  1. Ask the person to stand or sit with the arms relaxed.

  2. Palpate the lower border of the scapula.

  3. Follow the border toward the point where the medial and lateral borders meet.

  4. Identify the inferior angle and estimate its relationship to the thoracic spine.

The inferior angle is commonly used as an approximate landmark for the T7 spinous process when the arms are relaxed. Its position can change with arm movement, shoulder posture, and individual anatomy.

For this reason, the inferior angle should be used as a reference rather than as definitive proof of a vertebral level.

Although T7 is not included in the Back-Shu point list below, this landmark helps students orient themselves when counting thoracic vertebrae.

5. Iliac Crest: A Landmark for L4

The iliac crest is the upper border of the ilium, the broad bone that forms part of the pelvis. It can usually be palpated on both sides of the lower back.

How to locate the iliac crest

  1. Place the hands on the sides of the pelvis.

  2. Palpate upward until the upper bony borders of the ilia are identified.

  3. Identify the highest palpable points of the iliac crests.

  4. Imagine or establish a line connecting these points across the lower back.

The line connecting the highest points of the iliac crests commonly corresponds to the L4 spinous process or the L4-L5 interspace. The exact relationship varies between individuals, so the line is an approximate landmark.

Related Back-Shu point

BL25(Dachangshu) is located at the L4 level, approximately 1.5 cun lateral to the posterior midline.

The iliac crest line provides a useful starting point for locating L4. Once the approximate level has been established, palpate the lumbar spinous processes to confirm the location.

6. Posterior Sacral Foramina: Landmarks for S1 and S2

The posterior sacral foramina are paired openings on the posterior surface of the sacrum. The sacrum is the triangular bone at the base of the spine, between the two hip bones.

The posterior sacral foramina can be felt as small depressions on either side of the sacral median crest, although they may not be clearly palpable in every person.

How to locate the posterior sacral foramina

  1. Identify the sacrum below the lumbar spine.

  2. Palpate the sacral median crest along the posterior midline.

  3. Gently explore the areas on either side of the crest to identify the depressions corresponding to the posterior sacral foramina.

  4. Distinguish these depressions from the bony ridges and other irregularities of the sacrum.

The first and second posterior sacral foramina provide useful landmarks for locating the corresponding sacral levels.

Related Back-Shu points

  • BL27(Xiaochangshu) is located at the level of the first posterior sacral foramen, corresponding approximately to S1.

  • BL28(Pangguanshu) is located at the level of the second posterior sacral foramen, corresponding approximately to S2.

These points are located lateral to the posterior midline at the respective sacral levels. The exact surface location should be confirmed using an anatomical reference and the individual’s palpable structures.

7. Back-Shu Points and Their Vertebral Levels

The following table summarizes the Back-Shu points included in this lesson.

Acupoint

Pinyin

Associated level

BL13

Feishu

T3

BL14

Jueyinshu

T4

BL18

Ganshu

T9

BL19

Danshu

T10

BL20

Pishu

T11

BL21

Weishu

T12

BL22

Sanjiaoshu

L1

BL23

Shenshu

L2

BL25

Dachangshu

L4

BL27

Xiaochangshu

S1

BL28

Pangguanshu

S2

The levels in this table refer to the corresponding vertebral or sacral levels used for locating the points. In standard descriptions, the points are generally positioned approximately 1.5 cun lateral to the posterior midline.

Notice that the list does not include every Back-Shu point. For example, BL15(Xinshu), BL16(Dushu), BL17(Geshu), and BL24(Qihaishu) are omitted because they are not part of the current study list.

8. A Practical Palpation Sequence

When learning to locate Back-Shu points, it is useful to work systematically rather than trying to memorize every point independently.

A practical sequence is:

  1. Find C7. Use it as an initial reference at the base of the neck, while remembering that T1 can also be prominent.

  2. Locate the scapular spine. Use its medial end as an approximate guide to T3.

  3. Find the inferior angle of the scapula. Use it as an approximate reference for T7 when the arms are relaxed.

  4. Count the vertebral levels. Palpate the spinous processes carefully and confirm the sequence rather than assuming that each prominent structure represents a particular vertebra.

  5. Locate the iliac crests. Use the line connecting their highest points as an approximate guide to L4 or the L4-L5 interspace.

  6. Identify the sacrum. Palpate the posterior sacral structures and locate the posterior sacral foramina when possible.

  7. Confirm the point location. Once the correct level has been established, measure the appropriate lateral distance from the posterior midline.

The key is to combine several landmarks. A single landmark may be helpful, but no surface landmark is perfectly accurate in every individual.

9. Common Learning Challenges

Confusing C7 with T1

Both vertebrae may have prominent spinous processes. Do not identify C7 based only on which process feels largest. Compare movement and shape, and use additional landmarks when necessary.

Losing count between vertebrae

The spinous processes may be difficult to distinguish, particularly in the lower cervical and upper thoracic regions. Count slowly, maintain contact with the midline, and recheck the sequence from a known landmark.

Assuming the scapular landmarks are exact

The scapular spine and inferior angle are useful reference points, but their levels can change with posture and arm position. Confirm the spinal level directly whenever possible.

Confusing sacral ridges with foramina

The sacrum contains both raised bony structures and depressions. The posterior sacral foramina are openings, not bony projections. Learning to distinguish these structures through careful palpation is important for locating sacral points.

Conclusion

Accurate Back-Shu point location depends on understanding the relationship between acupuncture points and the underlying anatomy. C7, the scapular spine, the inferior angle of the scapula, the iliac crest, and the posterior sacral foramina provide useful reference landmarks for identifying spinal levels.

For students, the most reliable learning strategy is to combine anatomical knowledge, careful palpation, vertebral counting, and proportional measurement. With practice, these skills can make the location of Back-Shu points more systematic and easier to recall.

This article is intended for educational purposes. Acupuncture point location and needling require appropriate training, anatomical knowledge, and attention to patient safety.